Chemistry 30

FAQ | Formulas & Tables | Glossary | Home | Lab Storage | Site Map
Thermodynamics: Module Index | Practice Problems | Assignments | Student Lab | Research Ideas | Teacher Resources

 

Kinetics: Module Index | Practice Problems | Assignments | Student Lab | Research Ideas | Teacher Resources
Equilibrium: Module Index | Practice Problems | Assignments | Student Lab | Research Ideas | Teacher Resources
Solutions: Unit Index | Practice Problems | Assignments | Student Lab | Research Ideas | Teacher Resources
Acids & Bases: Module Index | Practice Problems | Assignments | Student Lab | Research Ideas | Teacher Resources
Redox Reactions: Module Index | Practice Problems | Assignments | Student Lab | Research Ideas | Teacher Resources

 

subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link
subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link

Solutions

3.4 Precipitation Reactions

Sometimes when two aqueous solutions are mixed together a solid is produced. This solid is called a precipitate, and the reaction is known as a precipitation reaction.

We can use our knowledge of solubility to predict whether a precipitate will form. For our discussion here, you will need to have the Solubility Table handy:

Important Data Table

(Although there is a mathematical method is often used for predicting precipitates, we will keep our discussion simple here).

Before we can predict whether or not a precipitation reaction will occur, it is useful to review a category of chemical reactions called double displacement (or double replacement) reactions. In this type of chemical reaction, we will predict what happens when solutions of two ionic compounds are mixed. If any reaction occurs, the two positive cations will exchange places.

For example:

ZnBr2 (aq) + 2 AgNO3 (aq) → Zn(NO3)2 + 2 AgBr

In this reaction we see that zinc and silver have switched places.

When writing double replacement reactions it is very important that you write down the correct chemical formula for each product before balancing the entire equation.

KEY POINT: Keep in mind that our reactants, ZnBr2 and AgNO3, are present as solutions, meaning that

ZnBr2 (aq) is really a short-hand form for writing Zn2+(aq) + 2 Br-(aq)

AgNO3 (aq) is really short-hand for Ag+(aq) + NO3-(aq)

It is important that you understand that the Zn2+ and Br- ions are not joined together when in solution - they are separated from one another and present as separate ions rather than a single molecule/formula unit.

The same is true for AgNO3 (aq) - the Ag+ and NO3- ions are present as separate ions, not bonded together.

It is possible that when these two solutions are mixed together every ion simply remains in solution, as separate ions. If that is the case, then no reaction actually occurs - now we just have one solution with four separate ions present.

But if we look at our solubility table, we see that Ag+ and Br- forms an insoluble compound. These two ions will "find each other" in the solution and form an insoluble precipitate, a solid.

This occurs because the attraction between the Ag+ and Br- ions is stronger than the attraction between the separate ions and the polar water molecules of the solvent. This is essentially what insoluble means.

On the other hand, we see in our solubility table that Zn2+ and NO3- form a soluble compound. Thus these two ions will remain in solution, not really forming a compound at all. The attraction between the polar water molecules and the Zn2+ and NO3- ions is stronger than the attraction between Zn2+ and NO3-. This is what soluble means.

We now need to return to our double displacement reaction and add the physical states to the two products:

ZnBr2 (aq) + 2 AgNO3 (aq) → Zn(NO3)2 (aq) + 2 AgBr(s)

To get a clearer view of what really occurs during this reaction, we will write our solutions out in long form, rather than the short-cut form. Remember - anything that is (aq) is really present as separate ions. This, however, ONLY applies to aqueous states.

Thus we can rewrite our equation as:

Zn2+(aq) + 2 Br-(aq) + 2 Ag+(aq) + 2 NO3-(aq)

   Zn2+(aq) + 2 NO3-(aq)+ 2 AgBr(s)

Notice that some ions are the same on both the reactant and product side of the equation, indicating that they did not undergo any change during the reaction. They were present, but did not precipitate.

Ions that are present in a reaction but do not participate are called
spectator ions.

Sometimes we remove spectator ions from an equation in order to highlight what changes actually occurred during a reaction.

Reactions in which the spectator ions have been removed are called
net ionic equations.

 

 

Therefore, for the overall equation:

Zn2+(aq) + 2 Br-(aq) + 2 Ag+(aq) + 2 NO3-(aq) → Zn2+(aq) + 2 NO3-(aq)+ 2 AgBr(s)

The net ionic equation is:

2 Ag+(aq) + 2 Br-(aq) → 2 AgBr(s)

(we usually arrange items so the positive cations are listed before the negative anions.)


An important thing for chemistry students to always keep in mind is that while it is possible to predict the products of a double displacement reaction, that does not always mean that a reaction will actually take place.

What does that mean?

Let's look at what happens when we mix solutions of Mg(CH3COO)2 and (NH4)2SO4.

Begin by writing a balanced equation and predicting the products of this double replacement reaction. Later we will predict the physical states of the products but we know that the reactants are both aqueous solutions.

Mg(CH3COO)2 (aq) + (NH4)2SO4 (aq)→ MgSO4 + 2 NH4CH3COO

Next, refer to a table of solubility to determine whether either, or both, of the two products will form insoluble precipitates.

We find that both MgSO4 and NH4CH3COO are soluble compounds, meaning they will remain in solution and not form precipitates.

Thus, there is really NO REACTION occurring, since all participants simply remain in solution!

Lab Activity

Precipitation Reactions


Knowledge of precipitation reactions also allows us to use selective precipitation to separate mixtures of ions.

For example . . .

We have a solution that contains the following cations:

Ag+, Cu2+, and Mg2+

Of course, it isn't possible to have a beaker full of just cations - each has to be associated with a negative anion. For the sake a argument, let's say each of these cations is associated with nitrate ions, NO3-.

Nitrate ions are useful to use since compounds containing nitrate are ALWAYS soluble. So we really have a mixture of AgNO3, Cu(NO3)2, and Mg(NO3)2. The nitrate ions will remain spectator ions, so we will not need to consider them further.

We wish to isolate each ion by causing one at a time to precipitate out of solution. Once a solid precipitate forms, we can filter the solid precipitate out, leaving the other ions still in solution.

We are given the following solutions to use:

Na2S, NaCl, and NaOH.

As with nitrate, you should begin to recognize that sodium ions, Na+, also always form soluble compounds. So Na+ will remain as a spectator ion and we can ignore it. Thus, we are really given solutions of the following anions:

S2-, Cl-, and OH-

We will be adding these one at a time to our cation mixture. We need to determine the order that we add these solutions so that we have ONE AND ONLY ONE precipitate occur with the first addition. This will remove one of the cations from the solution. We then continue until all cations are isolated from each other.

To help us analyze our situation, we'll prepare a chart, with the cations we need to separate along one axis and anions along the other axis:

.
Ag+
Cu2+
Mg2+
S2-
.
.
.
Cl-
.
.
.
OH-
.
.
.

Use a table of solubility to determine which combinations produce soluble compounds (sol) and which ones form compounds of low solubility. These are the ones that will precipitate out of solution (ppt - short-hand for precipitate).

.
Ag+
Cu2+
Mg2+
S2-
ppt
ppt
sol
Cl-
ppt
sol
sol
OH-
ppt
ppt
ppt

We need to determine the correct order for adding the negative ions. Be very careful with this next step - and be sure to read your chart in the right direction.

If we add S2- first, we would get two cations to precipitate - Ag+ and Cu2+. This would not help us, as they still be mixed together, this time as solids.

Adding OH- first would be even worse - all three cations would now be mixed together as solid precipitates.

Only by adding Cl- first can we separate out one of the ions, Ag+. The others would remain in solution. The formula of our first precipitate would be AgCl(s). It is important to realize that while both S2- and OH- also form a precipitate with Ag+, once it has been removed using Cl- we no longer need to worry about it - it's all gone.

Once we've added Cl-, we're removed Ag+ from solution. So if we now add S2- we can again form a single precipitate - CuS(s), thus removing Cu2+ from the mixture.

This will leave only Mg2+ still in solution. Sometimes this last cation is allowed to remain in solution. But if we chose we can add OH- and produce our final precipitate, Mg(OH)2 (s)

To summarize our solution:

  1. First add NaCl to remove Ag+ , forming the precipitate AgCl(s)
  2. Second, add Na2S to remove Cu2+, forming CuS(s)
  3. Last add NaOH to remove Mg2+, forming Mg(OH)2 (s)

Practice Assignment Do the practice exercises, then complete Assignment 5 before continuing to the next section.

 

 

 

 

Credits | Central iSchool | Sask Learning | Saskatchewan Evergreen Curriculum | Updated: 31-May-2006